KDT5002A rev. date: 31-jan- 11 ksd-xxxxxx-000 silicon photo transistor the contents of this data sheet are subject to change without advance notice for the purpose of improvement. when using this product, would you plea se refer to the latest specifications. description the KDT5002A is a high-sensitivit y silicon phototransistor mounted in 5mm(t1 3/4 ) plastic package with visible light cutoff filter. this photo transis tor is both compact and easy to mount. features y 5mm(t13/4) all plastic mold type y visible light cut-off type y single phototransistor output applications y optical counter y optical detectors y tape end sensor absolute maximum ratings ( at 25 unless otherwise noted ) parameter symbol rating unit collector-emitter voltage bv ceo 35 v emitter-collector voltage bv eco 6 v collector current i c 50 ma collector power dissipation p c 75 mw operating temperature t opr -20~+85 storage temperature t stg -30~+85 soldering temperature *1 t sol 260 notes : *1. for max.5 seconds at the position of 2mm from the package
rev. date: 31-jan- 11 ksd-xxxxxx-000 KDT5002A the contents of this data sheet are subject to change without advance notice for the purpose of improvement. when using this product, would you plea se refer to the latest specifications. electrical characteristics ( at 25 unless otherwise noted) ) parameter symbol conditions min. typ. max. unit collector current *2 i l ev=1000lx, v ce =10v - 4.5 - ma collector dark current i ceo e v =0, v ce =10v - - 200 na collector-emitter saturation voltage v ce(sat) e v =0.5mw/cm 2 , i c =1ma - - 0.6 v spectral sensitivity - 700 - 1,050 nm peak sensitivity wavelength p - - 880 - nm switching time rise time t r v cc =5v, i c =1ma, r l =1k ? - 8.5 - s fall time t f - 8.5 - s half intensity angle - - 25 - deg. notes : *2. e e : irradiance by cie standard light source a (2850k tungsten lamp) switching time test circuit inspection criteria ? in electrical and optical characteristics, a ll products are inspected for following 2 items. collector current : i cel dark current : i ceo ? no particular inspections shall be carried out for items other than those above. however they shall satisfy the ratings. cautions in usage ? store and use where there is no exterior force that will cause change in shape. ? store and use where there is no hydrogen sulfide gas, or any other corrosive gas. ? the bending or cutting of the lead should be done at r oom temperature, no force being applied on the package. ? solder the lead pin under conditions of the absolute maximum rating chart and do not apply force on the lead pin after soldering.
rev. date: 31-jan- 11 ksd-xxxxxx-000 KDT5002A the contents of this data sheet are subject to change without advance notice for the purpose of improvement. when using this product, would you plea se refer to the latest specifications. guarantee period and scope ? period one year after delivery to the desired place. ? scope replacement of products will be done if any problems lie in our company's products. however, we are not liable for your damage due to lack of caution. others any doubts concerning this specification sh ould be discussed fully by both parties. package outline dimensions
|
